Free Ground Shipping on Orders Over $49. Details & Exclusions

PLC Lighting 8026 Piccolo 10 Inch Wide 1 Light Outdoor Wall Light

  • Capitol ID: 1763884 MFR SKU: 8026SL
Shown in Bronze finish and Frost glass
Shown in Silver finish and Frost glass
$ 150.00

Glass: Frost
  • Select Options to View Availability

Add to Cart Add to Wishlist
  • Free Shipping!

The PLC Lighting Piccolo 8026 is a transitional outdoor wall light available in Bronze and Silver finish.The transitional style is sure to complement any decor.

  • Duomount:  Item can be installed as Direct Mount Semi Flush or Hanging Pendant
  • Lamping: Incandescent: 1 - Medium Base 60 Watt
  • Voltage:  Line Voltage (120 volts)
  • UL Listing:  Wet Locations
  • Attention:  Suitable for installation in all outdoor spaces.
  • Dimensions
  • Height:   10.00 inches
  • Width:   10.00 inches
  • Depth:   4.00 inches
  • Weight:   8.00 pounds
3.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
1
0
0
Acceptable
Nice design. Fastener heads were full of finish (paint?) and would not accept the designed tool driver to turn them. This condition makes them hard to install and hard to access to change lamps, so select a long lasting lamp because you definitely don't want to turn these fasteners in and out often.
The fasteners for the glass and outboard flange also are difficult to access and difficult to start the threads in the fixture body because they need perfect alignment and are tough to view because of the design of the surrounding flange features.
I would suggest getting another fastener, perhaps a SS bevel headed fastener without the paint in the head, or an Allen (hex) headed fastener instead.
PLC should provide section cuts through the fixture to show the 1/4" flange on the back that requires a silicone gasket. Those gaskets were useless. They would not stay on prior to mounting them on the wall because the corners of the gasket do not match the corners on the flange. So, although they were designed to make the connection of the fixture to the wall substrate weatherproof, it is impossible to make them perform as intended because the gaskets will not stay on. PLC couldn't even mount them on the fixtures prior to shipping. All of them came dislodged from their intended mounting.
A work around to break the aluminum welds of the flange off by bending them at two points per side will allow the flange to be removed without harm to the light body. Then the back side of the fixture can be mounted flat to the substrate with a good silicone sealant completely around the mounting area for a better seal is a possibility.
I like the way they light.

Pros: Nice design, Attractive Design, Weather Resistant

Cons: Filled Fastener Heads Con, Difficult To Install, Uneven Paint Finish, Some Areas Unfinished
July 1, 2014
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
PLC Lighting

Since 1989, PLC Lighting, Inc. has continued to provide our customers with both contemporary and traditional lighting fixtures in a multitude of styles. Our product can be found in showrooms throughout North, Central and South America, as well as the Caribbean Islands, who furnish the finest residences, hotels, restaurants, and office complexes all over the world. PLC Lighting, Inc. is committed to making sure that all of the product shown in "Contemporary Elegance" is of the highest quality and available with the lamping options specified.


Top